Building Balcarres' and Breymann's Redoubts (Part 6)

...and another week has flown by. Less than 17 to go until I finish work, which is rather exciting. 



This weekend I've managed to complete the log layers up to their full height and added/replaced upright posts to the same level. In the pictures below the uprights were half way through being replaced and trimmed, so you'll get a better view in next weekends blog update. If anything looks shiny it is the coat of diluted PVA painted over all the woodwork, which is still drying.

The big experiment yesterday was DIY modelling compound, which I made in the following way:

In a (disposable for domestic harmony) mixing bowl I dumped a couple of scoops of filler powder and a sprinkle of wallpaper paste powder. I added approximately the same volume of water and mixed to a consistency something like single cream. Into this I put shredded newspaper and toilet paper and let this "mush down' before adding more in batches until I had a mouldable papier mache mix. I left it for 20 minutes or so as the newspaper was quite water-resistant, before plonking blobs onto the model and shaping it with my fingers. 

It took a while to get the right technique of light prodding with a fingertip and squeezing down and towards me to get the right sort of shapes, but one I was in the swing of things, the whole mixing bowl of grey mush had been transferred to the redoubt. I came back to it after a few hours for a bit more prodding and smoothing, and the newspaper had definitely softened more. Next time I'll add some shredded kitchen roll to the mix to get a mid-texture.

Below are some pictures taken after about 24 hours when the compound was still very damp but had firmed-up significantly. Once fully set this will get painted over with a DIY texture paste, so it doesn't need to be perfect, just form the rough shape that I need. Only the parts around the velley between the hills have a significant depth of papier maches, as the earth bank is shaped over XPS foam offcuts.






Here are some pictures of the whole model taken earlier today (before cutting the uprights down and adding some extra ones)




That is it for this weekend. Still very much "work in progress" but really taking shape and does reflect the overall footprint I was aiming for, adapted to be a robust wargaming model:













Comments